Manufacturer: Synthetic Future X R_Ware

Contact Synthetic Future X R_Ware

$5.00 $10.00

On Sale

Micro Voice Console

8 Track Console Mixer with EQ, Sends and Returns, Compressor, and lots of character!

Manual:

IO

  • Channel Stereo Inputs
    • Stereo signal input for the channel (top jack= left channel / bottom jack = right channel)
    • Use top jack for mono signals
  • Stereo SEND Outputs
    • Send the accumulated signal form all channels to external processing
  • Stereo RETURN Inputs
    • Return the externally processed send signal
  • Stereo Output
    • Output the processed stereo signal

Controls:

  • Channel Mute/Solo Switches

    • Mute or solo channels
    • Will also affect the signals that are going to the sends

  • Channel Input Gain Knobs

    • Set the input gain for each channel
    • Each channel saturates and may soft clip the signal when driving the channel too hot

  • Channel PAN Knobs

    • Pan the stereo signal in the stereo field (with equal power pan law)

  • Channel EQ Selection Switch

    • Left: EQ is OFF
    • Middle: EQ is enabled and applied according to the channel's EQ settings
    • Right: EQ is enabled and an additional 100Hz Low-Cut filter is applied

  • Channel EQ Low Knob

    • Increase or decrease the channel's low-end (gentle low-shelf at 80Hz)

  • Channel EQ Mid Knobs

    • Increase or decrease the channel's mids (gentle peak/bell at set frequency)

  • Channel EQ High Knob

    • Increase or decrease the channel's high-end (gentle high-shelf at 10Khz)

  • Channel Send Knobs

    • Set the amount of signal that is sent to the SEND outputs from this channel

  • Channel Level Knob

    • Set the channel output level

  • SEND LO CUT Switch

    • Optional Low-Cut for the SEND's return signal
      • Left: OFF
      • Middle: 100Hz Low-Cut
      • Right: 300Hz Low-Cut

  • Send Level Knob

    • Set the SEND's return level

  • Bus EQ Low Knobs

    • Set the Bus EQ's low band frequency and gain

  • Bus EQ Mid Knobs

    • Set the Bus EQ's mid band frequency and gain

  • Bus EQ High Knobs

    • Set the Bus EQ's high band frequency and gain

  • Bus Compressor Attack Knob

    • Set the attack time of the Bus Compressor

  • Bus Compressor Release Knob

    • Set the release time of the Bus Compressor

  • Bus Compressor Threshold Knob

    • Set the threshold level of the Bus Compressor
    • Note: the level is automatically compensated to bring the signal back up!

  • Bus Level Knob

    • Set the stereo output level