TRIPOLY

Polyphonic version of the TRIPLET oscillator, the TRIPOLY also has three oscillators that can be simultaneously used for fat chords.
The three oscillators can be set in octaves and/or fine tuned following pitch from the input, but can also be set to FIXED frequency.
Modulation inputs are available for SYNC, FM and PWM globally for the entire module, but are also available per oscillator. Per oscillator there is also an AM input available.

Switching the waveform can also be modulated - even at audiorate - but that's probably best done with a monophonic oscillator.

From top, left to right:
PITCH in - polyphonic input from keyboard
GLIDE - glide (portamento) setting for all oscillators

GLOBAL
AM in - amplitude modulation input for all oscillators
SYNC in - synchronize all oscillators to an external source
FM in - frequency modulate all oscillator using this input
PWM in - use pulse width modulation on all oscillators (when pulse wave is selected)

PER OSCILLATOR
ON (button) - switch oscillator ON or OFF (output to MAIN L and R)
FIX (switch) - when switched ON pitch is not influenced by PITCH in
FINE - fine tuning
OCT - coarse setting in octaves
WAVE in - modulate the choice of wave here
WAVE selector - choose WAVE type: SINE, TRIANGLE, SAW, RAMP, PULSE and SQUARE
PW - if PULSE is chosen, set the pulse width here
PAN - if using both L and R main outputs, set the panorama for the oscillator
VOLUME - set the level of the oscillator
OUT out - outputs the oscillator signal, independent of ON switch, so you have signal even when it is not audible in normal output (as modulation source for instance)
SYNC in - synchronize to external source
FM in - frequency modulate the oscialltor from external source
PWM in - use pulse width modulation from external source
AM in - amplitude modulation using an external source

MAIN
LEVEL - main overall level of all switched oscillators
L(M) out - left or mono signal
R out - right signal