R_Ware WarpSquare

Warp your Square! Square your Warp! Warp speed sound design! Enter the Warp Zone!

WarpSquare is a next-generation oscillator built for face-melting bass and extreme sound design. It lets you bend, distort, and warp square waves in ways never heard before.

With built-in unison and true stereo output, WarpSquare delivers massive, wide, and dynamic sound straight out of the box. Stack detuned voices for thicker-than-reality basslines, or push modulation to the edge for swirling stereo madness.

Perfect for riddim, dubstep, glitch, and experimental synthesis, WarpSquare offers instant warping, deep CV control, and limitless modulation possibilities. Whether you're crafting gut-punching basslines or chaotic harmonic textures, this module is your new secret weapon.

Manual

Pitch

• PITCH CV
  • Pitch CV input (1v/oct)
• OCT Knob
  • Set base octave
• FINE Knob
  • Set fine tuning (+/- 700cents)
• RETRIG CV
  • Retrigger all oscillators to their starting positions/phase
• EXP/LIN FM CV
  • Exponential/Linear Frequency Modulation that is synced to the oscillators frequency
  • Small knob at the top right of the jack attenuverts the CV signal
  • Small knob to the left of the jack routes the internal Sub Oscillator to this modulation target
• UNISON Knob
  • Set number of unison voices
• DETUNE Knob
  • Set Unison pitch detuning
• JITTER Knob
  • Set Unison pitch jitter (fast random pitch modulation)
• STEREO Knob
  • Set Unison stereo spread

WARP ZONE

• WARP Knob and CV
  • Warps the waveform through the WARP ZONE
  • Small Knob to the right of the knob sets deviation from knob value for unison voices
  • Small knob between CV jack and knob routes the internal Sub Oscillator to this modulation target
  • Small knob at the top right of the CV jack attenuverts the CV signal
• MORPH Knob and CV
  • Morphs the waveform from Squares to Saws
  • Small Knob to the right of the knob sets deviation from knob value for unison voices
  • Small knob between CV jack and knob routes the internal Sub Oscillator to this modulation target
  • Small knob at the top right of the CV jack attenuverts the CV signal
• Warp Zone Visualizer shows the current waveform according to the knob settings

Oscillator Modulation

• SYNC X Knob and CV
  • Sets the multiplier the signal syncs to (multiplies frequency of the oscillator which is synced)
  • Small Knob to the right of the knob sets deviation from knob value for unison voices
  • Small knob between CV jack and knob routes the internal Sub Oscillator to this modulation target
  • Small knob at the top right of the CV jack attenuverts the CV signal
• WINDOW and SHAPE Knobs
  • WINDOW sets the strength of the window applied to the synced signal (works like a level contour over one wavelength)
  • SHAPE sets the shape of the window from sine-esque to saw-esque to exp-curve-esque
• WIDTH Knob and CV
  • Sets the pulse width of the Squares (does not apply to the Saws when MORPH knob is turned fully cw)
  • Small Knob to the right of the knob sets deviation from knob value for unison voices
  • Small knob between CV jack and knob routes the internal Sub Oscillator to this modulation target
  • Small knob at the top right of the CV jack attenuverts the CV signal
• PHASE Knob and CV
  • Sets the phase of the oscillator
  • Small Knob to the right of the knob sets deviation from knob value for unison voices
  • Small knob between CV jack and knob routes the internal Sub Oscillator to this modulation target
  • Small knob at the top right of the CV jack attenuverts the CV signal
• SKEW Knob and CV
  • Skews the phase of the oscillator
  • Small Knob to the right of the knob sets deviation from knob value for unison voices
  • Small knob between CV jack and knob routes the internal Sub Oscillator to this modulation target
  • Small knob at the top right of the CV jack attenuverts the CV signal

SUB Oscillator

• SUB Switch
  • Sets the octave of the SUB Oscillator relative to the oscillator's octave
• SHAPE Knob and CV
  • Sets the shape of the SUB Oscillator from triangle-esque to sine to square-esque
  • Small knob at the top right of the CV jack attenuverts the CV signal
• MOD Knob and CV
  • Sets the strength of all internal SUB Oscillator modulation on other controls
  • Small knob at the top right of the CV jack attenuverts the CV signal
• MIX Knob and CV
  • Sets the mix between the SUB Oscillator and main oscillator
  • Small knob at the top right of the CV jack attenuverts the CV signal

OUTPUT

• LEVEL Knob and CV
  • Set the overall output level
  • Small knob between CV jack and knob routes the internal Sub Oscillator to this modulation target
  • Small knob at the top right of the CV jack attenuverts the CV signal
• DC Switch
  • Set the output DC Filter from
    • 20 Hz Infrasonic Filter (top)
    • 2 Hz DC Filter (middle)
    • INACTIVE (bottom)
• Stereo Output
  • Outputs the stereo oscillator signal