Manufacturer: Adroit Synthesis
This simple module extends the functionality of the Custom Scene Manager module in the Adroit Custom system by allowing you to use triggers to select scenes.
The SCENE OUT socket should be connected to the SCENE input socket of Custom Scene Manager.
A standard trigger signal sent to any of the module's 16 TRIGGER INPUT sockets performs the same function as clicking on the corresponding Scene Selector button on the attached Custom Scene Manager module.
An "LED ring" around each TRIGGER INPUT socket indicates the currently selected scene.
You'll generally use Custom Scene Manager's DISCRETE mode so that a trigger sent to the top-left TRIGGER INPUT socket will select scene 1, a trigger sent to the next socket to the right will select scene 2 and so on. The MORPH TIME parameter of Custom Scene Manager determines how quickly the transition between scenes occurs.
A trigger applied to the NEXT input socket steps forwards to the next scene. If the current scene is 16 then it wraps around to scene 1.
A trigger applied to the PREVIOUS input socket steps backwards to the previous scene. If the current scene is 1 then it wraps around to scene 16.
The NEXT and PREVIOUS inputs allow you use a clock to step through scenes, for instance every 1/16th note or every bar depending on the clock division ratio. This provides a more conventional approach than using V/BAR to drive the Custom Scene Manager in SEQUENCED mode.
When using this clocking approach you'll often need to reset to scene 1. You can achieve this by sending a trigger to the top-left TRIGGER INPUT socket.
For more details check out https://adroitsynthesis.com/custom-scene-trig.