.jpg)
Overview of the PoohBear's Treat Pot bundle. https://youtu.be/Hb-621RaRR4
Technical and Demo video https://youtu.be/WM9TcNoBiF0
From several inputs the device detects the latest signal change and then a matching pre-selected signal is sent to the output jack.
The ports have a priority from top to bottom, so if 2 or more ports change at the same time, the highest physical port that changed will be selected.
Note: the current input port that is being used is highlighted for convenience.
Options:
- Ignore 0: This is for selecting a new active input port, if the signal goes to zero ignore it.
- Out: Turns off the output
- ϕ Inv Sign, inverts the signal leaving the output port.
The output range is based on a number selected from 0 to 127 which is converted into either, 1v, 5v, -5 +5v or Note range voltages.
The Digital Display can be changed by hovering you mouse over it, then click and drag to change the value. You can also right click and enter a value in manual and also from the right click there is Midi learn so it can be assigned to a Midi controller.
Darkmode: double click the Bear but not too hard it might make him grumpy..
Personal reason behind device: To convert gates to signals that I then used the results to drive my Preset XXXX Steppers.
Build#10 Public Release