.jpg){kind=spacer}
In Range Randomiser, randomised range can be anything between 0-127 (user setable) which is converted into a few different scalling's for outputting with a couple unique options to play with.
Part of the PoohBears Goodie Bag Bundle.
Input trigger used to trigger a random value (can be a trigger or a gate).
("In Trig", when enabled (default) a voltage above 2.5v will trigger the device (VM standard), when disabled a voltage above 0v will trigger the device).
First display, sets the lowest range.
Second display, sets the highest range.
The Display can be changed by hovering you mouse over it, then click and drag to change the value. You can also right click and enter a value in manual and also from the right click there is Midi learn so it can be assigned to a Midi controller.
Unique modes:
- Off, normal randomization.
- Last, the last value will never be repeated.
- All, notes in the range are not repeated until all of the notes have been previously selected then the process is restarted.
Output modes:
- 1/127, A straight 1 volt range output.
- 5v/Range, Divide 5 volts by the range set e.g. C-1(0) to D-1(2) = range of 3 (remember Zero is a number), 5 / 3 = 1.66666v .
- 5/127, A straight 5 volt range output.
- Full KB, Voltage Modular normal keyboard scaling.
Darkmode: double click the Bear but not too hard it might make him grumpy..
Build #11/12: Added "In Trig" option so either a voltage above 0v or 2.5v will trigger the device.
Updated the digital display to change the cursor to an up and down arrow when rolled over. Updated the digital display to show correctly on a Mac (font alignment).Build #07/10: Updated the GUI (my digital display) to fall inline with my other modules. Changed the display range from "C-2 to G8" to "C-1 to G9" as I noticed a number of other modules used that display range (Note this is purely display only) added darkmode
Build #6 Release Build