PB FlipFlop Switcher


Or Get It As Part of PoohBear's Goodie Bag

$27.50 Add to Cart

FlipFlop Switcher is the brother of the FlipFlop Counter, however the switcher has a built in randomiser or you can control it externally to Flip Flop.

Part of the PoohBears Goodie Bag Bundle.

Video Manual

Video Manual of the Flip Flop series

1 x Random button (A), 2 x Constant Knobs (A and B), 2 x Inputs (A and B), 2 x Outputs (X and Y), 4 x switch positions (Flip and Flop) that allow for many different configurations.

Both A and B in Flip or Flop mode have the option of sending their output to X, or Y, or X and Y, or to block it (Off).

Common setup, Flip mode, A to X and B to Y, then when switched to Flop mode, A to Y and B to X, basically a crossover switch.

If nothing is set to go either X or Y you have an option of sending out 0 volts or the last know voltage (track and hold).

Pulse Rate: You can set a rate based the tempo set, this rate determines how often the randomisation process is called.
In Trig: An input trigger that overrides the Pulse Rate, the input trigger calls the randomisation process.
("In Trig", when enabled a voltage above 2.5v will trigger the device (VM standard), when disabled (default) a voltage above 0v will trigger the device).

Without anything plugged into the "Override", you can dial in a weight so you have a weighted randomise process going on.
With a cable plugged into the Override changes the "Weight" to a Threshold, you can have another external randomise process or even something as simple as a LFO Ramp to Flip Flop for you.
The "Weight" input port allows for the Threshold or Weight to be shifted about realtime.

Note: The (A) Random, Constant Knob and Input port are chained together, so the values are summed.
The (B) Constant Knobs and Input Port are chained together, so the values are summed.

Note: The Random is now a button so it can be used at anytime, before the random only worked if nothing was plugged into the Input Port (also the Constant Knobs did not exist at that time).

Build #18 Bug fix, "A" Flip Knob on Y was not setting.

Build #17 Added In Trig, a manual input trigger that overrides the Pulse Rate. Also made some optimization changes.

Build #16 Added new constant knobs, plus the Random is now a button so it can be added\injected into the chain at any time.

Build #15 Bug fix random value when a cable was plugged into the override and optimization.

Build #14 Made Weight\Threshold control finer, up to 8 decimal places, has to be manually changed via the edit mode.

Build #12,#13 Fixed timing issues.

Build #11, Just a cosmetic change only.

Build #10, Added: When no cable is in port "A" the internal random value is passed down the A channel and can then be treated like a normal input, setting the FLIP and FLOP to OFF will disable it. bug fix: Corrected slight timing issue bug fix: When offset was removed directly from the device the offset was not reset.

Build #9, Public Release..